Ford 2003 Mustang Workshop Manual page 3228

5. Disconnect the spring lock coupling at the compressor manifold and tube.
Discard the O-ring seals.
6. Remove the compressor to condenser discharge line.
7. To install, reverse the removal procedure.
Install new O-ring seals lubricated in clean PAG oil. For additional information, refer to
Section 412-00
Lubricate the refrigerant system with the correct amount of clean PAG oil. For additional
information, refer to
8. Evacuate, leak test and charge the refrigerant system. For additional information, refer to
Section 412-00 .
.
Section 412-00 .