Ford 2003 Mustang Workshop Manual page 3481

SECTION 417-01: Exterior Lighting
REMOVAL AND INSTALLATION
Lamp Assembly —Headlamp
Removal
1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
Raise the headlamp retainers.
2. Remove the headlamp assembly.
Disconnect the electrical connectors and replace the lamp if necessary.
Installation
1. To install, reverse the removal procedure.
If necessary, adjust the headlamps. For additional information, refer to
Adjustment in this section.
2003 Mustang Workshop Manual
Headlamp