5. Remove the bolt and detach the manifold and tube assembly.
6. Remove the compressor.
1. Remove the bolts.
2. Remove the compressor.
7. To install, reverse the removal procedure.
Install new O-ring seals lubricated in clean PAG oil.
If filtering of the refrigerant system is not to be performed, lubricate the refrigerant system
with the correct amount of clean PAG oil. For additional information, refer to
00
.
8. If filtering of the refrigerant system is not to be performed, evacuate, leak test and charge the
refrigerant system. For additional information, refer to
Section 412-00
.
Section 412-