Ford 2003 Mustang Workshop Manual page 3230

SECTION 412-03: Air Conditioning
REMOVAL AND INSTALLATION
Condenser to Evaporator Line
Material
Item
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning
system except when there is physical evidence of contamination from a failed A/C compressor or
damage to the suction accumulator.
1. Recover the refrigerant. For additional information, refer to
2. Remove the air cleaner outlet tube. For additional information, refer to
3. Raise the vehicle. For additional information, refer to
4. Remove the line bracket pin-type retainer.
5. Lower the vehicle.
6. Remove the nut and disconnect the fitting at the condenser.
Discard the O-ring seal.
Specification
WSH-M1C231-
B
2003 Mustang Workshop Manual
Section 412-00
Section 303-12
Section 100-02 .
.
.