SECTION 417-04: Daytime Running Lamps
REMOVAL AND INSTALLATION
Module —Daytime Running Lamps (DRL)
Removal
1.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed
to these charges, damage can result.
Disconnect the battery ground cable.
2. Remove the daytime running lamps (DRL) module and bracket assembly (15A270).
1. Remove the nut.
2. Disconnect the electrical connector.
3. Remove the DRL module and bracket assembly.
Installation
1.
CAUTION: When the battery is disconnected and reconnected, some abnormal
drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle
may need to be driven 10 miles (16 km) or more to relearn the strategy.
To install, reverse the removal procedure.
2003 Mustang Workshop Manual