SECTION 501-11: Glass, Frames and Mechanisms
REMOVAL AND INSTALLATION
Switch —Window Regulator Control
Removal
1.
CAUTION: Use a shop towel or similar material between the tool and the door trim
panel or damage to the door trim panel may occur.
Position the window regulator switch plate aside.
1. Pull at the service notch.
2. Lift to release the clip at the rear edge.
2. Remove the window regulator control switch.
1. Remove the screws.
2. Disconnect the connectors.
Installation
1. To install, reverse the removal procedure.
2003 Mustang Workshop Manual