Ford 2003 Mustang Workshop Manual page 3304

SECTION 413-01: Instrument Cluster
REMOVAL AND INSTALLATION
Instrument Cluster
Removal and Installation
All vehicles
1. CAUTION: Electronic modules are sensitive to electrical charges. If exposed to
these charges, damage may result.
Disconnect the battery ground cable. For additional information, refer to
2. Remove the headlamp switch knob.
Pull out the headlamp switch knob and insert a thin tool in the slot to release the knob
from the shaft.
3. Remove the screws and remove the instrument cluster finish panel.
4. Remove the screws and pull the instrument cluster forward to expose the electrical connector.
2003 Mustang Workshop Manual
Section 414-01 .