Ford 2003 Mustang Workshop Manual page 3919

Hide thumbs Also See for 2003 Mustang:

Table of Contents

SECTION 501-18: Convertible Top

GENERAL PROCEDURES

Linkage Adjustment

Threadlock and

E0AZ-19554-AA

Shoulder Bolt Kit

F5ZZ-76539A04-A

NOTE: Before starting the adjustment process, inspect the top for damage, make sure that the door

window glass and rear quarter glass are correctly adjusted then completely lower all window glass.

NOTE: After each adjustment make sure the convertible top operates correctly.

The Convertible Top Dowel Pins Fall Forward (Overshoot) or Rearward (Undershoot). The

Receiver Cups — Cam Bolt Adjustment.

1. Remove the quarter trim panel. For additional information, refer to

2. Close the convertible top and examine the position of the dowel pins relative to the receiver

3. Move the convertible top to the half-open position to access the cam bolt.

4. NOTE: Rotating the top of the cam bolt toward the front of the vehicle will lengthen the top,

increase the tension on the top and increase pull-down effort. Rotating the cam bolt in the

Specification

WSK-M2G351-A5 (type

2003 Mustang Workshop Manual

Section 501-05

Show Quick Links

Table of Contents