Ford 2003 Mustang Workshop Manual page 3389

SECTION 414-02: Generator and Regulator
REMOVAL AND INSTALLATION
Generator —4.6L 4V
Removal and Installation
1. Disconnect the battery. For additional information, refer to
2. Relieve the accessory drive belt tension and remove the belt from the generator pulley.
3. Raise and support the vehicle. For additional information, refer to
4. Disconnect the generator electrical connections.
Disconnect the electrical connector.
Position the cover aside, and remove the nut and battery positive cable.
5. Remove the upper and lower generator bolts.
6. Remove the generator by lifting up and pulling it forward.
7. To install, reverse the removal procedure.
2003 Mustang Workshop Manual
Section 414-01 .
Section 100-02 .