SECTION 419-10: Multifunction Electronic Control Modules
REMOVAL AND INSTALLATION
Module —Generic Electronic (GEM)
Removal
1.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed
to these charges, damage may result.
Disconnect the battery ground cable (14301).
2. Remove the generic electronic module (GEM)(14B205).
1. Remove the five electrical connectors.
2. Release the locking tab and slide the module off the bracket.
Installation
1. NOTE: When the battery (10655) is disconnected and reconnected, some abnormal drive
symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to
be driven 10 mile s (16 km) or more to relearn the strategy.
To install, reverse the removal procedure.
2003 Mustang Workshop Manual