Ford 2003 Mustang Workshop Manual page 4120

13. Install the steering wheel. Do not install the driver air bag module at this time. For additional
information, refer to
14. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of
the steering column.
15. Connect the battery ground cable. For additional information, refer to
16. With the restraint system diagnostic tools installed at all deployable devices, prove out the
supplemental restraint system (SRS). For additional information, refer to
Restraint System (SRS)
17. Disconnect the battery ground cable and wait at least one minute. For additional information,
refer to Section 414-01
18. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top
of the steering column.
19. Connect and position the driver air bag module to the steering wheel.
1. Connect the driver air bag module electrical connector.
2. Position the driver air bag module to the steering wheel.
Section 211-04 .
, in the Diagnosis and Testing portion of this section.
.
Section 414-01 .
Air Bag Supplemental