Ford 2003 Mustang Workshop Manual page 3806

26. Connect the climate control vacuum harness connector.
27. Install the floor console. For additional information, refer to
28. Remove the LH front wheel and tire assembly. For additional information, refer to
04 .
29. Insert the bulkhead electrical connector into the dash panel.
30. Connect the bulkhead electrical connector.
1. Connect the bulkhead electrical connector.
2. Tighten the bolt.
31. Install the LH front splash shield.
1. Position the LH front splash shield.
2. Install the screws.
3. Install the pin-type retainers.
Floor Console in this section.
Section 204-