Ford 2003 Mustang Workshop Manual page 3964

NOTE: Make sure that the tetra seal is installed in the bottom of each of the folding top
hydraulic cylinder ports before attaching the upper and lower hose fittings.
Install the hydraulic lines using a thread locker onto the lift cylinder.
Motor assembly
2. NOTE: Be sure that each fitting is installed in the correct position on the folding top hydraulic
component.
Install the hydraulic lines using a thread locker onto the motor assembly.
Hydraulic system
3. Bleed the hydraulic system. For additional information, refer to
4. Install the motor and cylinders as an assembly.
5. Position the motor assembly.
6. Connect the motor electrical connector.
System Bleeding in this section.