SECTION 501-12: Instrument Panel and Console
REMOVAL AND INSTALLATION
Instrument Panel —Center Finish Panel
Removal and Installation
All vehicles
1. Disconnect the battery ground cable. For additional information, refer to
Vehicles with automatic transmission
2. Place the selector lever in the 1 position.
Vehicles with manual transmission
3. Remove the gearshift lever handle.
All vehicles
4. Remove the floor console finish panel.
Disconnect the electrical connector.
5. Remove the instrument panel center finish panel.
Disconnect the electrical connector.
6. To install, reverse the removal procedure.
2003 Mustang Workshop Manual
Section 414-01
.