Ford 2003 Mustang Workshop Manual page 3892

Installation
1. NOTE: Prior to installing the mounting arm and pivot shaft, install the retaining clip onto the end
of the mounting arm and pivot shaft linkage.
Install the mounting arm and pivot shaft.
1. Install through the RH cowl chamber opening.
2. Install the bolts.
2. NOTE: It is necessary to lower the hood to install the mounting arm and pivot shaft linkage onto
the wiper motor output shaft.
Install the mounting arm and pivot shaft linkage onto the wiper motor output shaft.
Snap the mounting arm and pivot shaft linkage onto the wiper motor output shaft.
3. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms
may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven
16 km (10 miles) or more to relearn the strategy.
Reconnect the negative battery cable.
4. Cycle the wiper motor to the park position.