10.
CAUTION: If the vehicle is to be driven within 24 hours of urethane adhesive
application, Urethane Adhesive Essex U-216 meeting Ford specification WSB-M2G316-B
must be used due to its one hour cure time.
Apply a bead of Urethane Adhesive Essex 400-HV or Essex U-216 meeting Ford specification
WSB-M2G316-B to the pinch weld.
11.
CAUTION: Open a window to prevent the back window glass from being pushed out
by air pressure when the door is closed.
Using the alignment marks install the back window glass.
12. After the glass is set, check for water leaks and add urethane adhesive where needed.
13. Install the headliner.
14. Install the roof side trim moulding. For additional information, refer to
Section 501-08
.