Ford 2003 Mustang Workshop Manual page 3223

5. Raise the vehicle. For additional information, refer to
6. Remove the bolt and the compressor manifold assembly.
Discard the O-ring seals.
7. To install, reverse the removal procedure.
Install new O-ring seals lubricated in clean PAG oil.
Lubricate the refrigerant system with the correct amount of clean PAG oil. For additional
information, refer to
8. Evacuate, leak test and charge the refrigerant system. For additional information, refer to
Section 412-00 .
Section 412-00 .
Section 100-02 .