Ford 2003 Mustang Workshop Manual page 4009

SECTION 501-20A: Safety Belt System
REMOVAL AND INSTALLATION
Safety Belt Buckle —Rear Seat
Removal
1. Remove the rear seat cushion.
2. Remove the bolt and the safety belt buckle.
Installation
1. NOTE: LH and RH rear seat safety belt buckles have different anchor plates. Make sure correct
part is used when installing buckle and anchor plate in the anchor locator feature.
NOTE: LH rear seat safety belt buckle anchor plate shown.
To install, reverse the removal procedure.
2. Make sure the safety belt buckles are routed correctly and are placed through the seat cushion.
3. Check the restraint system for correct operation.
2003 Mustang Workshop Manual