Ford 2003 Mustang Workshop Manual page 3793

SECTION 501-12: Instrument Panel and Console
REMOVAL AND INSTALLATION
Instrument Panel
Removal
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to
these charges, damage may result.
1. Remove the driver air bag module. For additional information, refer to
2. Remove the passenger air bag module. For additional information, refer to
3. Remove the LH front wheel and tire assembly. For additional information, refer to
04 .
4. Position the LH fender splash shield away from the dash panel.
1. Remove the pin-type retainers.
2. Remove the screws.
3. Position the LH fender splash shield away from the dash panel.
5. Disconnect the bulkhead electrical connector from inside the fender opening.
1. Loosen the bolt.
2. Disconnect the bulkhead electrical connector.
6. Release the bulkhead electrical connector from the dash panel.
2003 Mustang Workshop Manual
Section 501-20B
Section 501-20B
.
.
Section 204-