SECTION 501-05: Interior Trim and Ornamentation
REMOVAL AND INSTALLATION
Trim Panel —Door
Removal
All vehicles
1.
CAUTION: Use a shop towel or similar material between the tool and the front door
trim panel or damage to the front door trim panel may occur.
Position the window regulator switch plate (14527) aside.
1. Pull at the service notch.
2. Lift to release the clip at the rear edge.
2. Remove the window regulator switch plate.
1. Disconnect the power mirror electrical connector.
2. Remove the screws and the window regulator switch plate.
3. Remove the door latch release handle cup (22634).
2003 Mustang Workshop Manual