Ford 2003 Mustang Workshop Manual page 3957

SECTION 501-18: Convertible Top
REMOVAL AND INSTALLATION
Stay Pad —Convertible Top
Removal
1. Remove the convertible top material. For additional information, refer to
Material in this section.
2. Remove the rear window glass. For additional information, refer to
Rear Window Glass
3. NOTE: Mark the old stay pad staple locations and transfer to the new stay pads.
Remove the staples from all of the bows.
Installation
1. Staple the stay pad to the number one bow.
2. NOTE: The stay pad should be tight between the number one and number four bows.
Staple the stay pad to the number four bow.
3. Cut the excess stay pad material from the rear of the number four bow.
in this section.
2003 Mustang Workshop Manual
Convertible Top
Convertible Top Assembly—