Ford 2003 Mustang Workshop Manual page 3225

SECTION 412-03: Air Conditioning
REMOVAL AND INSTALLATION
Suction Accumulator to Compressor Line —4.6L
Material
Item
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning
system except when there is physical evidence of contamination from a failed A/C compressor or
damage to the suction accumulator.
1. Recover the refrigerant. For additional information, refer to
2. Remove the air cleaner outlet tube. For additional information, refer to
3. Disconnect the spring lock coupling at the suction accumulator.
Discard the O-ring seals.
4. Disconnect the spring lock coupling at the compressor manifold.
Discard the O-ring seals.
5. Remove the suction accumulator to compressor line.
Specification
WSH-M1C231-
B
2003 Mustang Workshop Manual
Section 412-00 .
Section 303-12 .