Ford 2003 Mustang Workshop Manual page 3607

SECTION 501-03: Body Closures
GENERAL PROCEDURES
Hinge Adjustment
NOTE: The door should be adjusted for even and parallel fit with the body opening and surrounding
panels as well as making sure that the anti-chuck pin is not binding on convertible models.
1. Remove the A-pillar lower trim panel.
2. Position the electrical connectors aside.
3. Loosen the lower front door hinge-to-body nut enough to permit movement.
4. Remove the fender. For additional information, refer to
5. Mark the position of the upper and lower front door hinges to the body to use as reference
points.
6. Loosen the four upper and lower front door hinge-to-body bolts enough to permit movement.
2003 Mustang Workshop Manual
Section 501-02 .