Ford 2003 Mustang Workshop Manual page 3746

SECTION 501-11: Glass, Frames and Mechanisms
GENERAL PROCEDURES
Heated Window Grid Wire Repair
Material
Item
Dark Walnut Metallic Acrylic
Lacquer Touch-up Paint
ALBZ-19500-5858A or
equivalent
Rear Window Defroster Repair
D8AZ-19562-AA or equivalent
1. NOTE: A single break or any breaks which exceed 25 mm (1 inch) in one grid cannot be
repaired. Install a new rear window glass.
NOTE: If the first layer of the heated rear window grid (brown) is damaged or missing, it will be
necessary to apply touch-up paint on the glass prior to applying the silver rear window defroster
repair.
Repair any inoperative grid wires using rear window defroster repair.
2. Bring the vehicle up to room temperature of at least 16° C (60° F) or above.
3. Clean the entire grid line repair area with a non-alcohol based window cleaner and 0000 steel
wool.
4. Mark the location of the grid break on the exterior of the rear window glass.
Specification
ESR-M2-P100-
C
WSB-M4J58-B
2003 Mustang Workshop Manual