Ford 2003 Mustang Workshop Manual page 3227

SECTION 412-03: Air Conditioning
REMOVAL AND INSTALLATION
Compressor to Condenser Discharge Line —4.6L
Material
Item
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning
system except when there is physical evidence of contamination from a failed A/C compressor or
damage to the suction accumulator.
1. Recover the refrigerant. For additional information, refer to
2. Disconnect the dual-function pressure switch electrical connector and remove the switch.
3. Remove the A/C muffler bracket nut.
4. Disconnect the fitting at the condenser.
Discard the O-ring seal.
Specification
WSH-M1C231-
B
2003 Mustang Workshop Manual
Section 412-00 .