Ford 2003 Mustang Workshop Manual page 3509

SECTION 417-02: Interior Lighting
REMOVAL AND INSTALLATION
Lamp Assembly —Map/Dome
Removal
1. Disconnect the battery ground cable.
2. Remove the lamp lens from the lamp assembly.
3. Remove the lamp assembly.
1. Remove the screws.
2. Remove the lamp assembly.
Disconnect the electrical connectors.
Installation
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms
may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven
16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.
2003 Mustang Workshop Manual