Ford 2003 Mustang Workshop Manual page 3994

Hide thumbs Also See for 2003 Mustang:

Table of Contents

Installation

NOTE: Make sure the retractor tongue faces inboard.

NOTE: Make sure the safety belt is not twisted.

1. The shipping clip must remain attached prior to the installation of the retractor into the

vehicle.The clip must be removed after the retractor is installed.

2. Position the safety belt anchor. Using the special tool, install the safety belt bolt.

3. Install a new mastic seal around the safety belt retractor before installing the retractor in the

4. Position the safety belt retractor. Using the special tool, install the bolt.

Show Quick Links

Table of Contents