opposite direction will have the opposite effect.
NOTE: Turn the adjusting cam one notch at a time.
Adjust the adjusting cam as needed.
1. Remove the cam stop set screw.
2. Rotate the adjusting cam.
3. Install the cam stop set screw.
5. Make sure the convertible top operate correctly.
6. Install the quarter trim panel. For additional information, refer to
7. Close the convertible top.
Convertible Top Lifts Up Unevenly — Lift Cylinder and C-pivot Inspection
8. Remove the quarter trim panel. For additional information, refer to
9. NOTE: This step applies to vehicles equipped with the Mach sound system.
Remove the screws and disconnect the electrical connectors.
10. Remove the screws.
Section 501-05
.
Section 501-05
.