SECTION 501-02: Front End Body Panels
REMOVAL AND INSTALLATION
Fender
Removal and Installation
1. On the RH fender, remove the antenna base.
1. Remove the antenna base cap.
2. Remove the screws.
3. Remove the antenna base.
4. Disconnect the antenna cable from the antenna base.
2. Remove the front bumper cover. For additional information, refer to
3. Remove the screw, the two pin-type retainers and the front rocker panel moulding.
4. Remove the fender splash shield screw.
5. NOTE: Position the fender splash shield aside.
2003 Mustang Workshop Manual
Section 501-19
.