Ford 2003 Mustang Workshop Manual page 3199

Item
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (MC YN-12-C)
Removal
1. Remove the A/C compressor (19703). For additional information, refer to
Compressor—3.8L
2. Remove the bolt.
1. Hold the A/C disc and hub assembly (19D786) with the special tool.
2. Remove the bolt.
3. Remove the A/C disc and hub assembly and spacer (19D648).
1. Thread an 8 x 1.25 mm (0.05 in) bolt into the A/C disc and hub assembly to force it from
the compressor shaft.
2. Lift the A/C disc and hub assembly and spacer from the compressor shaft.
4. Using the special tool, remove the shaft seal felt from the nose of the A/C compressor.
5. Clean the compressor nose area.
Specification
WSH-M1C231-
B
or Air Conditioning (A/C) Compressor—4.6L
Air Conditioning (A/C)
in this section.