Ford 2003 Mustang Workshop Manual page 3610

SECTION 501-03: Body Closures
GENERAL PROCEDURES
Door Alignment
NOTE: The door should be adjusted for even and parallel fit with the body opening and surrounding
panels as well as making sure that the anti-chuck pin is not binding on convertible models.
1. Mark the position of the front door hinges to the front door to use as reference points.
2. Loosen the front door hinge-to-front door bolts enough to permit movement.
3. Adjust the front door alignment to specification.
4. NOTE: After aligning the door, verify that the door can be closed easily and fits tightly.
Tighten the front door hinge-to-front door bolts.
2003 Mustang Workshop Manual