Ford 2003 Mustang Workshop Manual page 3162

SECTION 412-02: Heating and Ventilation
REMOVAL AND INSTALLATION
Evaporator Core Housing
Material
Item
PAG Compressor Oil (R-134a
Systems)
F7AZ-19589-DA (Motorcraft
YN-12-C)
MERPOL®
NA
Removal
NOTE: The evaporator core is not separately serviceable, it is serviced only with the evaporator core
housing assembly.
1. Disconnect the battery ground cable.
2. Recover the refrigerant. For additional information, refer to
3. Drain the cooling system. For additional information, refer to
03B .
4. Remove the instrument panel. For additional information, refer to
5. Disconnect the heater hose couplings from the heater core. For additional information, refer to
Section 412-00
6. Disconnect the vacuum connector.
Specification
WSH-M1C231-
B
ESE-M99B144-
B
.
2003 Mustang Workshop Manual
Section 412-00 .
Section 303-03A or
Section 501-12
Section 303-
.