Ford 2003 Mustang Workshop Manual page 2926

SECTION 308-03C: Manual Transaxle/Transmission — T56
INSTALLATION
Transmission
Material
Item
DEXRON III® (ATF)
Transmission Fluid
XT-2-QDX or equivalent
Pipe Sealant with Teflon®
D8AZ-19554-A or equivalent
Premium Long Life Grease
XG-1-C, K or T or equivalent
1. NOTE: Before installing the transmission, the ball stud, clutch release lever and the input shaft
must be cleaned and lubricated with grease.
Position the transmission to the clutch adapter housing. Install the eight transmission-to-clutch
adapter housing bolts.
2. Connect the output shaft speed (OSS) sensor electrical connector.
3. Connect the reverse lamp electrical connector.
Specification
DEXRON III®
WSK-M2G350-
A2
ESA-M1C75-B
2003 Mustang Workshop Manual