Ford 2003 Mustang Workshop Manual page 3123

SECTION 412-00: Climate Control System - General Information
GENERAL PROCEDURES
Refrigerant System Filtering Following Air Conditioning
(A/C) Component Installation
Special Tool(s)
Set, A/C Fittings
412-DS028 (014-00333, D93L-
19703-B) or equivalent
1. Install the new A/C compressor. For additional information, refer to
2. Install the new suction accumulator/drier. For additional information, refer to
3. Install the new A/C evaporator core orifice. For additional information, refer to
4. Orient the filter inlet toward the A/C condenser core.
5. NOTE: The pancake filter is not permanently installed and will be removed at the end of this
procedure.
Temporarily install the pancake filter between the A/C condenser core and the condenser to
evaporator tube.
1. Use flexible refrigerant hose of 17,238 kPa (2,500 psi) burst rating.
2. Make the connections using the A/C Test Fitting Set.
2003 Mustang Workshop Manual
Section 412-03
Section 412-03
Section 412-03
.
.
.