SECTION 309-00: Exhaust System
REMOVAL AND INSTALLATION
Muffler —4.6L (2V)
Removal and Installation
1. Use a jack to support and lower the rear axle.
2. Remove the upper arm-to-differential bolt.
3. Remove the nut and bolt, and disconnect the rear shock absorbers (18124) from the axle
housing.
Discard the nut.
4. Lower the rear axle.
5. Remove the dual converter assembly nuts. (RH shown, LH similar.)
6. Remove the RH intermediate exhaust hanger insulator.
2003 Mustang Workshop Manual