Ford 2003 Mustang Workshop Manual page 3030

6. Disconnect the speed control cable from the throttle nailhead.
7. Disconnect the speed control actuator cable from the speed control servo pulley.
1. Gently push in the retaining spring.
2. Disconnect the speed control cable slug from the speed control servo pulley.
8. Remove the speed control servo.
1. Remove the bolts.
2. Remove the speed control servo.
Installation
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms
may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven
16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.