Ford 2003 Mustang Workshop Manual page 2998

Hide thumbs Also See for 2003 Mustang:

Table of Contents

SECTION 310-02: Acceleration Control

REMOVAL AND INSTALLATION

Accelerator Cable —4.6L (2V)

Removal and Installation

1. Push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm.

2. Remove the bolts retaining the accelerator cable to the dash panel.

3. Disconnect the accelerator cable from the throttle body by rotating the throttle body full open

and aligning the cable with the release slot.

4. Disconnect the accelerator cable from the retaining bracket by compressing the locking tabs

and back-feeding the cable through the bracket and out of the engine compartment.

2003 Mustang Workshop Manual

Show Quick Links

Table of Contents