Ford 2003 Mustang Workshop Manual page 3027

SECTION 310-03: Speed Control
REMOVAL AND INSTALLATION
Actuator Cable —Speed Control-Cobra
1. Remove the speed control actuator cable end from the throttle body.
1. Lift the speed control cable from the throttle nailhead.
2. Release the speed control cable from the throttle bracket.
2. Remove the speed control cable from the retaining clips.
3. Remove the LH front wheel and tire assembly. For additional information, refer to
04 .
4. Position aside the LH front splash shield.
Remove the pin-type retainers.
Remove the screws.
5. Depress the locking tab and rotate the speed control actuator cable cap to remove.
2003 Mustang Workshop Manual
Section 204-