Ford 2003 Mustang Workshop Manual page 2909

XG-1-C, K or T
Threadlock and Sealer
E0AZ-19554-AA
Black Non-Acid Cure
Silicone Rubber
E7TZ-19562-A
1. Lubricate all components with transmission fluid during assembly.
2. Attach the transmission adapter plate to the special tool.
3. NOTE: If a new front input shaft bearing or front countershaft bearing was installed, install new
bearing cups.
Install the input shaft bearing cup and the countershaft bearing cup. Do not install the shims at
this time.
4. Install the input shaft.
5. Install the mainshaft onto the input shaft.
WSK-M2G351-A5
(type II)
ESL-M4G273-A