Collect Call Barring By Extension - Siemens HiPath 1100 Programming Manual

Programming an extension
Step by step
emg
q
84
w
p
Enter an MSN (up to 20 digits).
w
r
Press this key.
Initial status for programming mode.

Collect call barring by extension

When this blocking is activated, the system automati-
cally rejects all incoming collect calls over a digiital line;
calls received over an analog line are rejected only at the
moment they are answered.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
w
r
Activate/Disable collect call barring:
or
q
= Activate
r
= Disable (default)
w
p
Enter the next extension number.
or
w
r
Press this key.
Initial status for programming mode.
If a call has been answered at least once by the
system, collect call barring cancels the blocking.
If an incoming call over a digital line is forwarded
because there was no answered (*14), and col-
lect call barring is activated, the call will ring at
the first attendant for the external line.
Please ask your local carrier about enabling
blocking on digital lines.