Siemens HiPath 1100 Programming Manual page 133

Step by step
Date Time
22.11.99 14:00:00 01
• Type of Call (I):
1 = Incoming call
2 = Outgoing call
5 = Transferred incoming call
6 = Transferred outgoing call
7 = 3-way conference with incoming call
8 = 3-way conference with outgoing call
* = Incoming call, not yet answered
• Impulses (Call fees) with a TME1 module installed
Project Code (Account Code)
•
Example
Ln Ext WCOS Ring
21 00:14 00:01:34
A new call detail report is issued when a call is trans-
ferred. The hold time at the external line is accounted
for by the extension that transferred the call.
In the event of a power outage during ticketing,
all tickets that were being sent when the power
outage occurred are resent when a connection is
established once again.
Example:
If 300 tickets are stored in the memory, then
1. The user establishes a new connection, sends
100 tickets and terminates the connection.
2. Once a new connection is established, to
send the remainder 200 tickets, a power outage
occurs
3. After the power outage, once the user re-
sumes his/her work, a new connection is estab-
lished. During this connection all 200 tickets that
were being sent when the power outage oc-
curred are resent.
Duration Number
2222222
Report
I Callfees Acc. Code
1
133