Hipath 1100 Adsl Manager; Siemens Admin Console - Siemens HiPath 1100 Programming Manual

HiPath 1100 ADSL Manager

Step by step
188
HiPath 1100 ADSL Manager
The HiPath 1100 ADSL Manager is an administrative
program for programming an ADSL module
Hardware Requirements:
–10/100 Base-T network card
General Information:
– TCP/IP protocol
– Default IP: 10.0.0.1
– Default Subnet Mask: 255.255.255.0
If you need to reset the IP or Subnet Mask, enter
code 013. See "Restoring ADSL module default
settings."
When using an ADSL module, do not connect the
V.24 serial interface adapter cable to the PABX
After enabling ADSL access to your provider and con-
necting to the HiPath 1100, you must configure the ap-
propriate settings for WAN and LAN connection. The Hi-
Path 1100 ADSL Manager application is designed to
help you make these adjustments. It allows you to view,
edit and update your system's configuration.
For more details on how to configure an ADSL module,
see the topics in the Help file of the HiPath 1100 ADSL
Manager software.

Siemens Admin Console

This is an administrative program for programming
SLIMC, SADSLIM, LIMC and ADSLIM modules.
The modules can be configured by accessing their IP
number (Default = 192.168.254.253) from your web
browser http://192.168.254.253(Microsoft Internet Ex-
plorer or Netscape Navigator, V. 5.0 higher).
The Siemens Admin Console provides a series of tabs
in which you can check or change settings.
General Information:
– Default IP of the modem: 192.168.254.254
– Default IP of the module: 192.168.254.253
– Default Subnet Mask of the module: 255.255.255.0
– Default Gateway of the module: 192.168.254.254