Call Cost Limit For An Extension; Date For Updating The Call Cost Limit For An Extension - Siemens HiPath 1100 Programming Manual

Step by step
emk
dhh
q
dhi
de.ge
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
w
p
Enter the maximum amount that can be spent by the
extension (up to 9 digits).
p
Enter the decimal separator position (0 to 3)
Examples:
– for R$ 0.12: 000000012 and 2 (comma position)
– for R$ 2.00: 00002 and 0 (comma position)
– for R$ 123456.789: 123456789 and 3 (comma po-
sition)
w
Initial status for programming mode.

Call cost limit for an extension

This setting limits how much an extension has available
for Call Charges.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
w
r
Activate/deactivate call charge limit:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.
Date for updating the call cost limit for an ex-
tension
This specifies a day for resetting the call charge limit.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
Enter a day for resetting the limit (01 to 31).
or
q
To deactivate.
General settings
107