Overflow For A Group Of External Lines - Siemens HiPath 1100 Programming Manual

External line settings
Step by step
dmm
d lmd
or
42

Overflow for a group of external lines

This feature makes a second group of external lines
available in the event the lines in the first group are
busy. The availability of the second group of external
lines depends on the extension's class of service.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
lmm
to
Enter the number for the group of external lines (e.g.
w
p
Select an option:
e
f
g
w
r
Press this key.
Initial status for programming mode.
= A specified group of external lines (the first
group is the default setting):
Enter a number to specify the overflow group to
be used:
d lmd
or
= All external line groups
= None
Example:
801 and 802 external lines are programmed as
part of the 890 group of lines 890.
When using code 002, Extension 11/101 is as-
signed to group 890. This means that when the
"0" access code is entered at this extension a
search for a free line is performed in group 890.
If no available line is found in group 890 and this
option is configured, the system will search for a
line in the overflow group.
Internet access (*493) does not work for the
overflow group.
Only one level of overflow functions.
lmm
to