External Message Waiting Indicator (Mwi); Activating External Message Waiting Indicator - Siemens HiPath 1100 Programming Manual

Programming an extension
Step by step
deh
82
e
= standard 900 line Ω (default)
f
= 600 line Ω
g
= standard 900 line Ω (default)
h
= 600 line Ω
w
p
Enter the next extension number.
or
w
r
Press this key.
Initial status for programming mode.
External Message Waiting Indicator
(MWI)
When voice mail services are provided by a local carrier,
the HiPath 1100 enables a feature called Message Wait-
ing Indicator (MWI) on the voice mail server. With this
feature, a group of extensions called an External MWI
group is able to receive signals generated by the voice
mail server that indicate when there is a message wait-
ing in the user's mailbox.
This notification is sent using an FSK protocol
( page 43). The signals are detected over an analog
trunk by a voice mail server configured for this type of
protocol.
For standard telephones with a display, MWI will only
be indicated if a CLIP is configured for the extension us-
ing option 3 or 4 (
Activating external message waiting indica-
tor
Activates the MWI feature for a group of extensions.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
q r
Activate/Disable an external MWI group:
or
q
= Activate
page 70).
See voice mail Protocol page 192.