External Line Prefix; External Number Registration - Siemens HiPath 1100 Programming Manual

Digital trunk settings
Step by step
elm
e
eme
dde . ehd
dde . ehd
160

External line prefix

This setting specifies the prefix for the PABX external
lines, for domestic and international calls. By default,
the type of a programmed call is not specified.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
f
or Select the type of call:
e
= National
f
= International
p
Enter the line prefix (up to 5).
w
r
Press this key.
Initial status for programming mode.

External number registration

To use the attendant feature each MSN must be regis-
tered to a specific slot.
If the prefix (Code 089) for these numbers has already
been configured, only the final digits need to be regis-
tered.
By default, no digits are specified.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter a slot (001 ... 140).
w
p
Enter the MSN (up to 20 digits).
w
r
Press this key to confirm the entry.
(After entering 20 digits, the entry mode exits automat-
ically.)
w
Enter the next slot.
or
w
r
Press this key.
Initial status for programming mode.