Isdn Layer 2; B Channel - Siemens HiPath 1100 Programming Manual

Digital trunk settings
Step by step
edf
de
dg
q
edg
156

ISDN Layer 2

Allows you to change certain default ISDN settings for
specified countries.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
df
, , Enter the S
ee
or
p
Enter the slot for the S
dd . de
port 00 is only used for the external line - PP or PMP)
dd . dh
dd . dh
module, place position 11 and port from 00 ... 04).
w
r
Activate/deactivate layer
or
q
= Activated
r
= Deactivated
w
Initial status for programming mode.

B Channel

Allows you to change some default ISDN settings for
specified countries.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
p
Enter the S
df
dg
de
p
Enter the slot for the S
dd . de
port 00 is only used for the external line - PP or PMP)
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
module slot on the system
0
module slot:
0
= For the HiPath 1120 (The slot for
= For the HiPath 1150;
= For theHiPath 1190 (For the second
module slot on the system.
0
= For the HiPath 1120
= For the HiPath 1150
ee
and = For the HiPath 1190 .
module slot:
0
= For theHiPath 1120 (The slot for
1
.