Mailbox Greeting Configuration; Message Source - Siemens HiPath 1100 Programming Manual

Step by step
fdk
de
fdl
khme khmf
or

Mailbox greeting configuration

This setting specifies the type of greeting to be used for
a specific mailbox when the Type of greeting for a mail-
box features is configured as "Manual" (Option 1, Code
206).
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
fh
Enter the number of the mailbox you would like to se-
...
lect.
e f
or Select the type of greeting:
e
= Greeting 1 - Day (default)
f
= Greeting 2 - Night
w
r
Press this key.
Initial status for programming mode.

Message source

This setting assigns a message to one of the two EVM
ports. Alternatively, the message can be assigned to an
MSN.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
e f
or
Select a Message:
e
= Greeting 1
f
= Greeting 2
Enter the port to be used for the MSN message play-
back.
w
r
Press this key.
Initial status for programming mode.
The procedure for recording a greeting/message
is described in the User Manual.
EVM module
173