Automatic Update Of Date/Time; Callback For External Calls Via Isdn - Siemens HiPath 1100 Programming Manual

General settings
Step by step
dgl
q
ffe
q
104

Automatic update of date/time

This setting allows automatic synchronization of the
system's date and time through the local carrier, during
an external call.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/Disable synchronization:
or
q
= Activated (default)
r
= Deactivated
w
Initial status for programming mode.

Callback for external calls via ISDN

By configuring this setting, an external ISDN call can
schedule a Callback for the MSN number called.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
or
Activate/deactivate callback:
q
= Activate callback (default)
r
= Disable callback
w
Initial status for programming mode.
When you restore the default setting (99), the
date the SW was generated will be displayed.
The time displayed will be 12:00.
The settings that are automatically updated are:
month, day, time and minute. Year is not includ-
ed in the FSK message settings - it is defined as
the software's manufacturing date and can be
manually adjusted.