Waiting Message Server Number; Collect Call Barring By Extension - Siemens HiPath 1100 Programming Manual

Programming an Extension
Step by Step
82

Waiting Message Server Number

This setting specifies a MSN number for the Waiting
Message server.
By default, no MSN is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 5
Enter a MSN (up to 20 digits).
Press this key.
#
Initial state for Programming Mode.

Collect Call Barring by Extension

When this blocking is activated, the system automati-
cally rejects all incoming collect calls over a digital line.
Calls received over an analog line are rejected only at
the moment they are answered.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 9 3
Enter the extension number (e.g. 11/101).
or
Activate/Deactivate Collect Call Barring:
#
*
*
#
Enter the next extension number.
or
Press this key.
#
Initial state for Programming Mode.
= To activate
= To deactivate (default)
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.
To enable Blocking on digital lines, please inquire
your local carrier.